crwdns2942213:0crwdne2942213:0
-
-
With one hand, push the rectangular button located on the back top-side of the phone.
-
With your other hand, remove the rear cover.
-
-
-
Remove 5 screws, 1 from each corner of the phone and 1 from the center-right of the phone.
-
-
-
-
Now pull off the rear casing, using an opening tool. **Buttons for volume and pictures may fall out**
-
-
-
Once you have removed the rear casing flip it over to see a small circular metal piece with 2 gold springs sticking out of the bottom. That is the speaker.
-
Opposite the 2 small gold springs there will be a small black tab attached to the speaker sitting in a groove. Using tweezers or a small tipped screwdriver lift up on the tab to pop the speaker out.
-
-
-
Replace the broken speaker with a new one (make sure to line up the tab with the groove). Push firmly into place. Follow reverse instructions to put the rear casing and back cover on.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
UMass Dartmouth, Team 2-1, Gulbrandsen Fall 2013 crwdns2935289:0UMass Dartmouth, Team 2-1, Gulbrandsen Fall 2013crwdne2935289:0
UMASSD-GULBRANDSEN-F13S2G1
crwdns2931471:04crwdne2931471:0
crwdns2935297:010crwdne2935297:0
