crwdns2915892:0crwdne2915892:0
This guide will assist you in replacing your phone's faulty camera.
crwdns2942213:0crwdne2942213:0
-
-
Use a spudger to remove the two screw covers below display.
-
Use a screw driver to remove the four Phillips #00 (3.3mm) screws at corners of the display.
-
-
-
Note: Side buttons may fall out when removing the front case. Do not misplace them.
-
Note: Each side button will only fit in the side that it came from.
-
Insert a spudger between the black and grey casings and gently spread them apart.
-
Work around the device gradually, opening the gap further.
-
-
-
-
Use the spudger and lift upward to disconnect the ribbon from the main part of the phone.
-
Carefully remove any parts stuck to the front case such as speakers.
-
-
-
Disconnect the ribbons on both sides of the camera by prying them up with a spudger.
-
-
-
Hold the wiring out of the way and pull up with a spudger behind the camera.
-
The camera unit should come unglued and separate from the phone.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Cal Poly, Team 3-29, Amido Winter 2012 crwdns2935289:0Cal Poly, Team 3-29, Amido Winter 2012crwdne2935289:0
CPSU-AMIDO-W12S3G29
crwdns2931471:04crwdne2931471:0
crwdns2935297:014crwdne2935297:0
