crwdns2915892:0crwdne2915892:0
Use this guide to replace the control panel in your LG front load washing machine.
crwdns2942213:0crwdne2942213:0
-
-
Turn off the main water supply
-
Unplug your washer
-
Disconnect all water connections at the rear of your washer
-
-
-
Remove the screw(s) securing the top panel brackets to the back panel.
-
-
-
Slide the top panel towards the rear of the device to disconnect its clips.
-
-
-
Tilt the top panel upward to completely disconnect it from the chassis.
-
Remove the top panel.
-
-
-
-
Pull the detergent drawer away from the chassis as far as it will go.
-
-
-
Press down on the "Push" button to disengage the clips securing the detergent drawer.
-
Pull the drawer out of its slot on the chassis and remove it.
-
-
-
Disconnect the connectors attached to the control panel.
-
-
-
Remove the screw(s) securing the control panel to the top edge of the chassis.
-
-
-
Remove the screw(s) securing the detergent dispenser.
-
-
-
Use a flathead screwdriver, or a pry tool, to unclip the control panel from the chassis.
-
-
-
Remove the control panel, making sure to thread any cables through the chassis.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
