crwdns2915892:0crwdne2915892:0
A camera in a device captures moments and memories, but with extensive use, the camera component may encounter issues or stop functioning properly. If you've noticed blurry images, black screens, or error messages when trying to access your camera, it could indicate a problem with the camera module itself.
In this guide, we'll walk you through the steps to safely remove and replace the camera in the LG Enact. This guide will help you address potential camera-related issues. Remember to power off your device before starting the camera replacement process to ensure a safe and effective procedure.
crwdns2942213:0crwdne2942213:0
-
-
Open the back cover by prying into the bottom tab with an iFixit opening tool.
-
-
-
Use an iFixit opening tool to remove the battery.
-
-
-
Remove the three 1.2 mm screws from the speaker using a Phillips #00 screwdriver.
-
-
-
-
Use an iFixit opening pick to pop out the speaker.
-
-
-
Remove the nine 1.2 mm screws from the midframe using a Phillips #00 screwdriver.
-
-
-
Use the iFixit opening pick to pry out the midframe.
-
-
-
Slowly, pop the camera lens out of the socket.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Using tweezers, remove the camera assembly connector.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0