crwdns2915892:0crwdne2915892:0
Before completing this replacement guide, it is important to unplug the device. This replacement guide will show how to replace the internal circuit board from the device.
crwdns2942213:0crwdne2942213:0
-
-
Pry open the back case on the device with a plastic opening tool going around the edges of the device to ensure it is taken off with no damage then finally remove it and place it on the side.
-
-
-
Pry the battery out of the device with a plastic opening tool opposite from the plastic pieces keeping it in place and remove it gently in order to ensure that you don’t damage it.
-
-
-
Dislodge the microSD card from the microSD card slot using your index finger and remove it.
-
-
-
-
Remove the three 4 mm screws using a JIS screwdriver with a J000 head from the bottom part of the internal casing.
-
-
-
Pry open the bottom part of the internal casing with the plastic opening tool and remove it.
-
-
-
Remove the four 4 mm screws using a JIS screwdriver with a J000 head from the top part of the internal casing.
-
-
-
Pry open the top part of the internal casing with the plastic opening tool and remove it.
-
-
-
Pry the screen from the internal circuit board with a plastic opening tool and remove it.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
IUPUI, Team S6-G1, Baechle Spring 2018 crwdns2935289:0IUPUI, Team S6-G1, Baechle Spring 2018crwdne2935289:0
IUPUI-BAECHLE-S18S6G1
crwdns2931471:03crwdne2931471:0
crwdns2935297:012crwdne2935297:0
