crwdns2915892:0crwdne2915892:0
The screen is very fragile, and often becomes cracked. In this guide, you will learn how to remove it, so that it can easily be replaced.
crwdns2942213:0crwdne2942213:0
-
-
First, press in and slide forward the battery latch as indicated by the arrow.
-
-
-
Press down on battery until you hear a click and release it. Battery should easily slide out.
-
-
-
Remove the 3.9 mm frame screws using a Phillips #00 screwdriver.
-
-
-
Using both hands, carefully pull the frame apart from the camera.
-
-
-
-
Remove the two 3.85 mm screws on the bottom right of the camera, as indicated.
-
-
-
Remove dial button located on top of camera, by gently pulling up.
-
-
-
Starting at one side, carefully work the chrome frame off of the camera itself.
-
-
-
On the right side of the camera, locate and remove the two 3.25 mm screws as highlighted.
-
-
-
Carefully lift the motherboard panel up, pulling towards the left. Make sure you do not rip the blue ribbon.
-
Using a plastic opening tool, gently lift up on the ribbon fastener until it is in an upright position.
-
Slide panel away from camera.
-
-
-
Using a plastic opening tool, gently lift ribbon clamp as indicated to remove the screen ribbon from the motherboard.
-
Screen should now be detached. Gently lift it away from the base of the camera.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
University of Kentucky Louisville, Team 1-4, Rountree Winter 2015 crwdns2935289:0University of Kentucky Louisville, Team 1-4, Rountree Winter 2015crwdne2935289:0
LOUISVILLE-ROUNTREE-W15S1G4
crwdns2931471:04crwdne2931471:0
crwdns2935297:014crwdne2935297:0
