crwdns2915892:0crwdne2915892:0
Use this guide to replace the back cover in your Kobo Libra Colour eReader.
The back cover includes the plastic shell along the back of the eReader and the power button.
Note: Replacement back covers don't have a printed serial number, so you'll have to refer to your device's internal settings for your serial number after this repair.
Kobo supports their eReaders with a warranty. If your device is still under warranty, Kobo may be able to help. Before starting a repair, review your warranty information or check support documentation.
crwdns2942213:0crwdne2942213:0
-
-
Unplug all cables and fully shut down your eReader.
-
Your screen should be black and say Powered off.
-
-
-
Flip your eReader over so the screen is facing down.
-
Angle an opening pick straight down, and insert its tip under the top right corner of the back cover, near the power button.
-
Push downward and pry up with the pick until you feel it slide between one of the clips and the frame.
-
-
-
-
Slide the pick toward the bottom right corner to release the clips along the right edge.
-
-
-
Angle the pick flat under the back cover and rotate it around the bottom right corner to release its clips.
-
-
-
Slide the pick toward the bottom left corner to release the clips along the bottom edge.
-
-
-
Grip the right edge of the back cover and lift it away from the eReader to release the remaining clips.
-
Remove the back cover.
-
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers Community for help.
Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers Community for help.
