crwdns2915892:0crwdne2915892:0
If your device is not turning on, it may be the result of a faulty power cord. This guide demonstrates how to replace it.
crwdns2942213:0crwdne2942213:0
-
-
Using a Phillips #2 screwdriver, remove the 10mm screw on the back cover by rotating it counterclockwise.
-
The back cover is now free. Remove it by pulling back and up on the cover.
-
-
-
Using a Phillips #2 screwdriver, remove the 5mm screws holding the trimband to the top housing by rotating them counterclockwise.
-
Pull the trimband off the housing by grabbing each side and pulling it off the front.
-
-
-
-
Using a Phillips #2 screwdriver, remove the 12mm screw holding the grounding wire in place by rotating it counterclockwise.
-
Using pliers or tweezers, remove the connectors attached to the white and black wires.
-
-
-
Using a screwdriver, pull the cord string relief out of the mixer by putting it behind the cord and pulling away from the mixer until it is free.
-
Remove the cord from the mixer body.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
Cal Poly, Team S2-G5, Livingston Winter 2018 crwdns2935289:0Cal Poly, Team S2-G5, Livingston Winter 2018crwdne2935289:0
CPSU-LIVINGSTON-W18S2G5
crwdns2931471:04crwdne2931471:0
crwdns2935297:010crwdne2935297:0
