crwdns2915892:0crwdne2915892:0
This guide will help walk you through the steps of replacing the needle of a Keurig Mini. To get into the device all you will need is a #1 Philips screw driver.
crwdns2942213:0crwdne2942213:0
-
-
Press on tab while pulling up on K-cup until you hear a click. Repeat for the remaining tabs. We found using the smallest of the "plastic opening tools" worked wonders.
-
-
-
Once all of the tabs have been pressed, the K-Cup should just pop out. After, you just pull the remainder of the K-Cup. You have successfully removed the K-Cup.
-
-
-
-
Remove two 9 mm Phillips #1 screws.
-
The screws are located on the top of where the K-Cup would be.
-
-
-
Once you remove the screws, the top cover should come out.
-
You will then want to remove these screws which are the same size.
-
-
-
Once you get those removed, you are going to want to pull on the hose until it pops off.
-
Once the hose comes off, the needle will fall out by itself.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2915084:0crwdne2915084:0
USF Tampa, Team 17-6, Blackwell Winter 2016 crwdns2935289:0USF Tampa, Team 17-6, Blackwell Winter 2016crwdne2935289:0
USFT-BLACKWELL-W16S17G6
crwdns2931471:02crwdne2931471:0
crwdns2935297:02crwdne2935297:0
crwdns2917034:0crwdne2917034:0
Where do you buy the needle I know you can get the exit needle with the holder, but can’t find this one.
