crwdns2915892:0crwdne2915892:0
Has your Katadyne Hiker water filter become unable to pump or exceptionally hard to do so? Use this guide to regain functionality and ease of use.
crwdns2942213:0crwdne2942213:0
-
-
Remove the "snap fit" guard by pulling directly away from the filter body.
-
-
-
Remove the pump handle by pulling it completely out of the shaft.
-
-
-
Use the pump handle to remove the filter cap.
-
Place the horizontal groove of the pump handle depicted in image 1 onto the filter fins.
-
Press the pump handle firmly against the fins and turn the filter counter clockwise.
-
Once unscrewed, remove the filter completely from the body.
-
-
-
-
Lightly brush the entire filter with a soft bristled toothbrush under running water.
-
-
-
Replace the filter inside the filter body and screw clockwise until tight.
-
-
-
Lubricate the pump handle O-ring extensively with the Katadyne lubricant (sold with pump).
-
-
-
Replace the pump handle inside the pump handle shaft.
-
-
-
Replace the "snap-fit" guard by pushing directly toward the filter body.
-
If difficulty pumping persists, a new filter is required.
If difficulty pumping persists, a new filter is required.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
Cal Poly, Team 24-6, Green Winter 2015 crwdns2935289:0Cal Poly, Team 24-6, Green Winter 2015crwdne2935289:0
CPSU-GREEN-W15S24G6
crwdns2931471:04crwdne2931471:0
crwdns2935297:015crwdne2935297:0
crwdns2947410:01crwdne2947410:0
wow. this is very helpful post.
thanks for nice guide line..
plz cheak out this—https://waterfilterhub.com
