crwdns2915892:0crwdne2915892:0
Follow this guide to remove the handle for the Karcher Rotary Floor Cleaner 17833080 2017 in preparation for further disassembly.
This guide can also be used to remove and replace the parts listed in the parts section.
crwdns2942213:0crwdne2942213:0
-
-
Lift the tank by the handle and remove it from the device.
-
-
-
Press the yellow button near each wheel base to release the wheels.
-
Remove both wheels from their sockets.
-
-
-
Use a T20 driver to remove the three screws securing the pump cover.
-
-
-
Squeeze the right plug by the edges and pull it out of its socket.
-
-
-
-
Remove the following screws securing the left retaining bracket:
-
Four T40 screws
-
Two T20 screws
-
-
-
Raise the handle to the upright position.
-
Engage the retaining bracket to lock the handle in place.
-
-
-
Use a T20 driver to remove the two screws securing the right splash guard.
-
-
-
Use a T20 driver to remove the following screws securing the right retaining bracket:
-
Two 85 mm-long screws
-
Four 45 mm-long screws
-
-
-
Lift the handle assembly away from the device and remove it.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
