crwdns2915892:0crwdne2915892:0
When exposed to excessive dust and lint, the air vent and fan can be clogged by lint build-up. Where they become unusable because the bugs can't pass through the holes and the fan slows down. This guide will show people how to restore their Trap to be fully functional and allow the airflow to be dragged to the sticky trap.
crwdns2942213:0crwdne2942213:0
-
-
Unplug the power plug from the device.
-
-
-
Open the tray lid to remove the used insect trap.
-
-
-
Flip the device upside down while leaving the tray lid open.
-
-
-
-
Flip the device so that it is no longer upside down.
-
If the top cover is stuck, grab onto the base and push the cover out with your thumb.
-
-
-
Be careful not to damage the wire connecting it to the base. They should be connected still.
-
-
-
(Extra) Two screws are protecting the circuit board if you want to do something with it.
-
-
-
Double-check that the fan has no dust to ensure the motor will run more efficiently with less dust.
-
To reassemble your device, follow these instructions in reverse order. Plug the power supply into the device and check if everything works. The UV light should display like normal.
To reassemble your device, follow these instructions in reverse order. Plug the power supply into the device and check if everything works. The UV light should display like normal.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0