crwdns2915892:0crwdne2915892:0
This guide is for replacing the outer casing of the JBL Pulse for when some kind of damage has occurred to the outside of the device.
crwdns2942213:0crwdne2942213:0
-
-
Use a plastic opening tool to pry around the edges of the circular rubber panel.
-
-
-
Once the edges are loose, pull off the rubber button panel completely.
-
-
-
-
Use your plastic opening tool to pry the button board loose by lifting the edges.
-
-
-
Lift the button board, exposing the attached cable.
-
-
-
Pull black piece on top of socket away from board to loosen, then detach the cable.
-
-
-
Take out the four 9mm black PH0 screws from the top and bottom of the device.
-
Pull off cap by hand.
-
The outer casing can now be removed.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0