crwdns2915892:0crwdne2915892:0
This guide is to help you replace the internal speaker in a JBL Clip 3.
If the original speaker in your JBL Clip 3 stops working due to a mechanical failure and causes the speaker to produce no sound at all or an unpleasant buzzing or scratching sound, use this guide to replace it with a new speaker.
Note: Before beginning, make sure to power off the JBL Clip 3, and disconnect it from any external power sources.
crwdns2942213:0crwdne2942213:0
-
-
Insert the iFixit opening tool between the speaker grill and speaker housing and pry around the entire perimeter of the device until the grill releases.
-
-
-
Use a Phillips #1 screwdriver to remove the five 6.3 mm screws around the perimeter.
-
-
-
Separate the speaker housing from the rest of the body.
-
-
-
-
Use tweezers to remove the 2 pin and 4 pin connectors from the motherboard.
-
-
-
Use a Phillips #2 screwdriver to remove the two 6.3 mm screws.
-
-
-
Firmly grip the speaker connection plug with tweezers and pull it straight up, perpendicular to the motherboard, to release it.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
UMass Dartmouth, Team 1-5, Petersen Spring 2022 crwdns2935289:0UMass Dartmouth, Team 1-5, Petersen Spring 2022crwdne2935289:0
UMASSD-PETERSEN-S22S1G5
crwdns2931471:03crwdne2931471:0
crwdns2935297:06crwdne2935297:0
crwdns2917034:0crwdne2917034:0
Dear Mr. Molden,
Thank you for sharing!
Do you, by any chance, have a part# for that speaker and/or know where to purchase a replacement one?
Tks in advance!
marcelo_kalil@hotmail.com
