crwdns2933423:0crwdne2933423:0

Intertek 20006 Fan Replacement

crwdns2942213:0crwdne2942213:0

  1. Intertek 20006 Fan Replacement, Fan: crwdns2935265:01crwdnd2935265:01crwdnd2935265:02crwdne2935265:0 Intertek 20006 Fan Replacement, Fan: crwdns2935265:01crwdnd2935265:02crwdnd2935265:02crwdne2935265:0
    • Turn off the air humidifier using the 0/1 switch at the bottom edge of back side.

    • Hold the top-back of the air humidifier and remove the upper part from the lower part.

    • Remove water from the water chamber and wipe it.

  2. Intertek 20006 Fan Replacement: crwdns2935265:02crwdnd2935265:01crwdnd2935265:03crwdne2935265:0 Intertek 20006 Fan Replacement: crwdns2935265:02crwdnd2935265:02crwdnd2935265:03crwdne2935265:0 Intertek 20006 Fan Replacement: crwdns2935265:02crwdnd2935265:03crwdnd2935265:03crwdne2935265:0
    • Flip the humidifier so that the bottom is facing upwards.

    • Use a Phillips # 2 screwdriver to remove four 13 mm screws from the bottom cover hole.

    • Remove the bottom cover to access the fan and other parts of the humidifier.

  3. Intertek 20006 Fan Replacement: crwdns2935265:03crwdnd2935265:01crwdnd2935265:02crwdne2935265:0 Intertek 20006 Fan Replacement: crwdns2935265:03crwdnd2935265:02crwdnd2935265:02crwdne2935265:0
    • Use a Phillips #2 screwdriver to remove four 30 mm screws from the fan.

    • Remove the fan from its place and keep it close to its power connector.

  4. Intertek 20006 Fan Replacement: crwdns2935265:04crwdnd2935265:01crwdnd2935265:02crwdne2935265:0 Intertek 20006 Fan Replacement: crwdns2935265:04crwdnd2935265:02crwdnd2935265:02crwdne2935265:0
    • Using a spudger, straighten all three metal latches.

    • Hold both edges of the metal cover with your finger and pull upward to take it out from its position.

    • Metal cover edges are very sharp. Watch your finger when holding the metal cover.

  5. Intertek 20006 Fan Replacement: crwdns2935265:05crwdnd2935265:01crwdnd2935265:03crwdne2935265:0 Intertek 20006 Fan Replacement: crwdns2935265:05crwdnd2935265:02crwdnd2935265:03crwdne2935265:0 Intertek 20006 Fan Replacement: crwdns2935265:05crwdnd2935265:03crwdnd2935265:03crwdne2935265:0
    • Pull out the power connector of the fan from its port.

    • Use a wire cutter to cut the tie rope around the wires.

    • When cutting the tie rope, take care to avoid cutting any cables.

    • Remove the fan from the humidifier.

    • Plug in the new fan's power connector.

    • Tie all cables together using a twist tie.

  6. Intertek 20006 Fan Replacement: crwdns2935265:06crwdnd2935265:01crwdnd2935265:03crwdne2935265:0 Intertek 20006 Fan Replacement: crwdns2935265:06crwdnd2935265:02crwdnd2935265:03crwdne2935265:0 Intertek 20006 Fan Replacement: crwdns2935265:06crwdnd2935265:03crwdnd2935265:03crwdne2935265:0
    • Attach the metal cover where it was before.

    • Bend the latches halfway down using a spudger to secure the metal cover.

  7. Intertek 20006 Fan Replacement: crwdns2935265:07crwdnd2935265:01crwdnd2935265:01crwdne2935265:0
    • Secure the new fan with the four 30 mm screws using a Phillips #2 screwdriver.

  8. Intertek 20006 Fan Replacement: crwdns2935265:08crwdnd2935265:01crwdnd2935265:02crwdne2935265:0 Intertek 20006 Fan Replacement: crwdns2935265:08crwdnd2935265:02crwdnd2935265:02crwdne2935265:0
    • Put the bottom cover back in place.

    • Secure the bottom cover with the four 13 mm screws using a Phillips #2 screwdriver.

    • Flip the humidifier right-side up, and attach the upper part

crwdns2935217:0crwdne2935217:0

crwdns2935227:0crwdne2935227:0

[deleted]

crwdns2935283:005/08/20crwdne2935283:0

184 crwdns2915208:0crwdne2915208:0

crwdns2935295:0crwdne2935295:0

crwdns2944067:00crwdne2944067:0

crwdns2917038:0crwdne2917038:0

crwdns2936625:0crwdne2936625:0:

crwdns2936751:024crwdne2936751:0 1

crwdns2936753:07crwdne2936753:0 8

crwdns2936753:030crwdne2936753:0 19

crwdns2942667:0crwdne2942667:0 625