crwdns2915892:0crwdne2915892:0
The oscillation gear swivels the head of the fan back and forth by translating power from the motor into the oscillation arm.
crwdns2942213:0crwdne2942213:0
-
-
Unplug your fan.
-
Remove the 20 mm bolt that fastens the fan ring located at the bottom of the fan cage with a Phillips #3 screwdriver.
-
-
-
Remove the ring that runs around the edge of the fan cage.
-
-
-
Remove the 8 mm bolt fastening the fan blades to the rotor with a Phillip #3 screwdriver.
-
-
-
Slide the fan blade off the end of the rotor.
-
-
-
Unscrew the four 8 mm bolts that fasten the back of the fan cage back to the motor housing with a Phillips #3 screwdriver.
-
-
-
-
Unscrew the 10 mm screw in the center hole of the oscillation knob with a Phillips #3 screwdriver.
-
-
-
Use your fingers to gently pull the power knob directly away from the motor housing.
-
-
-
Unscrew the flat 17 mm nut fastened at the bottom of the power knob with a small crescent wrench.
-
-
-
Remove the four 6 mm bolts and small washers that secure the front face of the motor housing with a Phillips #3 screwdriver and remove the washers.
-
-
-
Pull the front face of the motor housing off toward the front of the rotor.
-
-
-
Remove the 10 mm triangular-headed bolt with a Phillips #3 screwdriver.
-
-
-
Slide the back end of the motor housing away from the front of the rotor.
-
-
-
Remove the small piece of paper hanging on the power button.
-
-
-
Using a Phillips #3 screwdriver, unscrew and remove the 7 mm long bolt and small washer fastening the yellow and green wire to the motor housing support.
-
-
-
Using a Phillips #3 screwdriver unscrew the 13 mm long screw fastening the motor housing support to the oscillation gear box.
-
-
-
Using a Phillips #3 screwdriver, unscrew the three 13 mm long screws fastening the grey plate to the top of the oscillation gear box.
-
Remove the grey cap covering the oscillation gear box.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0