crwdns2915892:0crwdne2915892:0
This guide shows how to replace the screen for the Insignia NS-DS9PDVD15.
crwdns2942213:0crwdne2942213:0
-
-
Turn the power off. Slide the power button to OFF.
-
-
-
Unplug AC adapter from car cigarette lighter.
-
-
-
Make sure there is no DVD or CD in the disc tray
-
-
-
Unscrew the nine 9mm screws with a JIS #000 screwdriver.
-
-
-
Pry off back panel with prying tool, then remove by hand.
-
-
-
-
After the back is removed and the disk tray is loose from the bottom, locate the two, 3 mm screws that hold the tray to the hinge.
-
Unscrew them with the JIS #000 screwdriver.
-
-
-
Slide the tray up and off of the hinge completely.
-
-
-
After the bottom cover and disk tray have been removed, remove the back panel from the top half.
-
There are six, 9 mm screws on the bottom cover and 2 screws on the hinge. Remove them with the JIS #000 screwdriver.
-
-
-
Once all the screws are removed, pry off the cover with the pry tool.
-
-
-
Remove the ribbon cable carefully with the pry tool.
-
First, push out the black portion.
-
-
-
Next, push out the 'ribbon' with the pry tool.
-
-
-
Unscrew the corners of screen with the JIS #000 screwdriver. There are four, 6 mm screws with washers.
-
-
-
After the screws and washers are removed, you can lift the screen off with the pry tool.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2947410:01crwdne2947410:0
what is the model of the LCD Panel?