crwdns2915892:0crwdne2915892:0
The Insignia NS-CLIP02 can develop a problem with power auxiliary ports malfunctioning, but don’t worry. They’re replaceable! If your device is not charging, this may be a key indicator that the port needs to be replaced.
Use this simple step-by-step guide to replace your motherboard that contains the auxiliary port in 30 minutes or less.
crwdns2942213:0crwdne2942213:0
-
-
Locate the bottom of the device.
-
-
-
Peel back the adhesive sticker using a metal spudger and remove the 11mm screw beneath the sticker with a Phillips head screw driver.
-
-
-
Using a plastic spudger, peel off the adhesive gel stoppers.
-
-
-
Unscrew the six 11mm screws with a Phillips head screw driver.
-
-
-
-
Remove the bottom of the device to reveal the motherboard.
-
-
-
Unscrew the 9.5mm screw located near the center of the motherboard with a Phillips head screw driver.
-
-
-
Lift the motherboard from the device and lie it face down. Beware of the cables plugged in on the back side
-
-
-
Remove the plug to your right from the motherboard.
-
-
-
Remove the plug in the front of the lcd screen plug.
-
-
-
Remove the LCD screen plug last. For reassembly, follow the instructions in reverse order, replacing the old motherboard with the new one to fix the power auxiliary port.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
USF Tampa, Team 9-3, Leahy Winter 2015 crwdns2935289:0USF Tampa, Team 9-3, Leahy Winter 2015crwdne2935289:0
USFT-LEAHY-W15S9G3
crwdns2931471:04crwdne2931471:0
crwdns2935297:06crwdne2935297:0
