crwdns2915892:0crwdne2915892:0
This guide details the necessary steps to remove the front facing camera from the Leader Impression i7 tablet. Make sure you have a replacement camera ready before starting this guide.
crwdns2942213:0crwdne2942213:0
-
-
Wedge the plastic opening tool into the seam nearest to the screen surface and begin to pry off the back of the device.
-
-
-
Move the plastic opening tool along the perimeter of the device, loosening the entire back as you go.
-
-
-
After the entire perimeter has been pried, remove the back of the device.
-
-
-
-
Remove the transparent, orange tape from the edge of the battery.
-
Pry the battery off, using the plastic opening tool.
-
-
-
Desolder the positive and negative leads.
-
-
-
Pull the battery away from the adhesive.
-
Peel the gray tape from the top of the battery.
-
-
-
Gently pull the front camera connection out of its socket.
-
-
-
Lift the camera unit from its housing. The unit should come out with minimal force.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.