crwdns2915892:0crwdne2915892:0
This guide shows how to take out and replace the screen in this device.
crwdns2942213:0crwdne2942213:0
-
-
Locate the screws holding the screen cover in place.
-
-
-
Remove the covers by inserting plastic spudger in between the edge of the cover and laptop.
-
Remove screws by using the Phillips head #0
-
-
-
Insert the flat metal spudger into the edge of the screen cover and slowly pry open.
-
Slide the spudger along the edges and pry open to release the cover from the clips
-
While slide the spudger up the side of the cover, pinch the cover to help unhook the clips
-
-
-
-
Remove the two screws located near the bottom middle of the screen
-
-
-
Flip over the green rectangular shaped board
-
Disconnect the screen from the rectangular board using your fingers or tweezers
-
-
-
Using "Flat metal spudger" lift up the screen from the bottom slowly until you see the ribbon cable
-
Detach the ribbon cable before lifting completely the screen
-
Now you be able to remove the screen
-
-
-
To replace the screen follow the next set of steps
-
Using your fingers or tweezers, pull out the light by placing them on the sides and lifting up
-
Insert the wide plug on the ribbon cable into the new screen and place back into the laptop.
-
Now if you follow these steps in reverse order, you will be able to finish replacing the screen
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
UMass Dartmouth, Team S6-G4, Bernier Spring 2018 crwdns2935289:0UMass Dartmouth, Team S6-G4, Bernier Spring 2018crwdne2935289:0
UMASSD-BERNIER-S18S6G4
crwdns2931471:04crwdne2931471:0
crwdns2935297:010crwdne2935297:0
