crwdns2915892:0crwdne2915892:0
The needle on a sewing machine may need to be replaced for a variety of reasons, but the main reason is typically due to damage. Oftentimes, needles break due to user error, including using a fabric that is too thick for that particular needle or threading the needle incorrectly. Regardless of the cause, knowing how to replace a needle is a must for all seamstresses. This guide will provide users with that knowledge, as it relates specifically to the Husqvarna Viking Designer 1 sewing machine.
crwdns2942213:0crwdne2942213:0
-
-
Remove the thread from the needle by pulling it out.
-
-
-
Turn the knob counterclockwise to life up the needle.
-
-
-
Place a sheet of paper under the foot. In the event that the needle falls out, this will prevent it from falling into the bobbin area.
-
-
-
-
Hold onto the needle with one hand, and use a Singer #412381501 screwdriver to loosen the needle clamp screw (model: Viking #4125825-01) located next to the top of the needle with the other hand.
-
-
-
Discard the broken or unwanted needle, and select a new one.
-
-
-
Insert the new needle with the flat side facing away from you.
-
-
-
Hold onto the needle with one hand, and use a Singer #412381501 screwdriver to tighten the needle clamp screw (model: Viking #4125825-01) with the other hand.
-
-
-
Thread the needle. (See pages 8-10 from the link.)
-
You may now remove the sheet of paper and begin sewing!
-
Replacing the needle is a quick, easy task to complete, using the directions provided in this guide.
Replacing the needle is a quick, easy task to complete, using the directions provided in this guide.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
Grand Valley State University, Team S3-G1, DeVasto Winter 2021 crwdns2935289:0Grand Valley State University, Team S3-G1, DeVasto Winter 2021crwdne2935289:0
GVSU-DEVASTO-W21S3G1
crwdns2934841:01crwdne2934841:0
crwdns2935303:01crwdne2935303:0
crwdns2917034:0crwdne2917034:0
Excellent illustration!!!
