crwdns2915892:0crwdne2915892:0
This Fast fix is needed if your Husqvarna Trimmer is running irregular or is having trouble running. This normally means the carburetor needs to be replaced. Please allow the unit to cool down prior to attempting the repair to avoid burning yourself. Also wear safety glasses to prevent gas splashing in your eyes when disconnecting fuel lines.
crwdns2942213:0crwdne2942213:0
-
-
Using your fingers, unscrew the air filter bolt and remove it from the filter cover.
-
-
-
Pull off the filter cover to reveal the air filter.
-
Remove the air filter from the filter housing.
-
-
-
Remove two 8mm nuts with an 8mm socket attached to a 1/4" ratchet turning the nuts counterclockwise.
-
-
-
-
Slide the choke lever to the full choke position.
-
-
-
Remove the plastic housing by pulling it away from the device.
-
-
-
Pull the carburetor off of the bolts.
-
-
-
Detach the throttle cable from the carburetor by tilting it 90 degrees and pulling up.
-
-
-
Remove the two fuel lines attached to the bottom of the carburetor using a set of needle nose pliers.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:03crwdne2935229:0
crwdns2915084:0crwdne2915084:0
University of Memphis, Team S2-G1, Baddour Spring 2019 crwdns2935289:0University of Memphis, Team S2-G1, Baddour Spring 2019crwdne2935289:0
UM-BADDOUR-S19S2G1
crwdns2931471:02crwdne2931471:0
crwdns2935303:01crwdne2935303:0
