crwdns2915892:0crwdne2915892:0
How to change a broken screen on your Huawei Y7 2019.
-
-
The new spare part that we will be installing onto the phone.
-
-
-
Remove the SIM Tray.
-
Use a plastic tool such as a spudger or opening pick to remove the back cover.
-
-
-
Remove the two silver Philips screws that are above the top right corner of the battery and below the camera.
-
Remove the motherboard plastic cover
-
Disconnect the battery and the fingerprint flex cable using a plastic pry tool.
-
-
-
-
Disconnect the screen flex cable and connect the new screen for test.
-
If the spare part is fully functioning then continue with the installation.
-
-
-
Remove the silver Philips screws and the charging dock cover.
-
Lift the board slightly to release the screen flex cable.
-
-
-
Warm up the glass to soften the adhesive.
-
Use plastic tools to remove the glass, then clean the frame from the adhesive.
-
-
-
Use double sided adhesive 1mm.
-
Use a little glue (B-7000, E-8000, T-8000 or similar) on the corners of the frame.
-
-
-
Install the new screen.
-
Use clamps until the glue dries.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:017crwdne2935229:0
crwdns2915084:0crwdne2915084:0
Master Techs crwdns2935289:0Master Techscrwdne2935289:0
Community
crwdns2931471:0321crwdne2931471:0
crwdns2935297:01,480crwdne2935297:0
