crwdns2915892:0crwdne2915892:0
This guide will help users step-by-step, learn how to disassemble the P8 Lite and replace the loudspeaker. A breakdown kit and replacement loudspeaker will be required to complete this task. Review the device guide to get started.
crwdns2942213:0crwdne2942213:0
-
-
Use the Spudger tool to get access to the loudspeaker. Locate where the headphone jack is, then move about one-inch to the right and begin to gently pry the back-cover off the phone with the flat end of the Spudger tool. Make sure to pry apart the entire perimeter of the back-cover to prevent bending/cracking of the plastic.
-
Tools used: Spudger tool (used as a wedge to pry off the back-cover and loudspeaker.)
-
-
-
-
Remove three silver Phillips 000 screws.
-
Remove four T5 Torx screws.
-
-
-
Gently, use the flat end of the Spudger tool, or a metal opening tool to lift and remove the loudspeaker from the phone. The loudspeaker is the entire portion of the phone where the screws were extracted.
-
To reassemble your device, follow Teardown Guide steps 4, 3, 2, 1 in that order.
To reassemble your device, follow Teardown Guide steps 4, 3, 2, 1 in that order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
Metro State, Team 1-2, Carpenter Spring 2016 crwdns2935289:0Metro State, Team 1-2, Carpenter Spring 2016crwdne2935289:0
MSU-CARPENTER-S16S1G2
crwdns2931471:03crwdne2931471:0
crwdns2935297:07crwdne2935297:0
