crwdns2915892:0crwdne2915892:0
This is a simple guide to wiring a keystone jack for use in house and business applications.
crwdns2942213:0crwdne2942213:0
-
-
Use your wire stripper to cut the outer sheath
-
Do Not Rotate more than 3-4 times as it will cut the wires underneath.
-
when the length of exposed wires are at a decent length (a little less than a thumbs length) separate the wires by color.
-
-
-
-
on the keystone jack you will see colors. line the wires up to the corresponding colors (white blue - blue, white orange - orange, etc.)
-
use the punchdown tool with the longer side of the blade on the outside to punch the wires in and it will cut off the excess.
-
repeat for each color
-
-
-
open up your mounting box
-
there should be a frame for your jack to snap into
-
-
-
place the jack into the mounting box, there should be places for zip ties to hold the cable in place
-
place the cover on top and you are done with your cable!
-
test the line using a cable tester.
-
Make Sure to test with a cable tester
Make Sure to test with a cable tester
crwdns2935221:0crwdne2935221:0
crwdns2935229:06crwdne2935229:0