crwdns2915892:0crwdne2915892:0
If your sink is clogged and you're looking for a quick way to clear it, this guide will walk you through using a wet/dry vacuum to effectively unclog your sink without the need for harsh chemicals or professional assistance.
This method is suitable for most standard sinks. Keep in mind that some stopper plugs are attached to the p-trap and may require extra precautions when removing them. Follow instructions here to learn how to do that. Additionally, some sinks have an overflow hole that should be sealed during this process to maintain proper suction.
Before beginning, make sure your sink is free of standing water and that your vacuum is ready for wet use. If needed, check your vacuum’s settings to ensure it's set up for liquid suction.
crwdns2942213:0crwdne2942213:0
-
-
Clear out the sink using a cup or sponge to remove any standing water for better suction.
-
-
-
If your sink has a stopper plug, take it out.
-
-
-
If your sink has an overflow hole, cover it with duct tape or a towel to seal it.
-
-
-
-
Before setting up, open your wet vacuum so it’s ready for use.
-
-
-
Remove the filter to avoid potential damage.
-
-
-
Position the vacuum hose directly over the drain.
-
Press the hose firmly against the drain.
-
-
-
Switch the vacuum to wet mode and turn it on.
-
Hold the hose over the drain for about two minutes to pull up the clog.
-
-
-
Check the vacuum hose for debris every few minutes.
-
If hair or gunk comes up, remove it by hand or with needle-nose pliers before continuing.
-
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2915084:0crwdne2915084:0
York University, Team 3-12, Woodhouse Winter 2025 crwdns2935289:0York University, Team 3-12, Woodhouse Winter 2025crwdne2935289:0
YORK-WOODHOUSE-W25S3G12
crwdns2931471:02crwdne2931471:0
crwdns2935303:01crwdne2935303:0
