crwdns2915892:0crwdne2915892:0
Over time, a PopSockets grip's adhesive loses its stickiness due to external factors such as dust or dirt accumulation and improper attachment. This guide will lead you through successfully replacing a worn out adhesive with a brand new one.
For audio-visual instructions, you may refer to this short video from YouTube as an alternative tutorial to perform this simple replacement.
After completing this guide, here are some helpful tips to prolong the stickiness of your PopSockets grip. Make sure to properly attach your grip with the new adhesive to the device of your choice. Also, we recommend to clean the area around your grip from time to time to prevent dust or grime build up.
crwdns2942213:0crwdne2942213:0
-
-
Gently tear off the worn out adhesive from the grip, using your fingers or a pair of tweezers.
-
-
-
Rub off any remaining adhesive residue with alcohol pads.
-
-
-
Wipe off any moisture from the previous step using a paper towel or a dry table napkin.
-
-
-
-
Peel off the protective backing from the new adhesive.
-
-
-
Gently place the new adhesive onto the clean area of the grip.
-
-
-
Flatten the attached adhesive with your thumbs to get rid off any air bubbles.
-
-
-
Weight the pop socket down using a book or any heavy item with a flat surface.
-
Leave it for at least 5 minutes to ensure firm attachment.
-
After completing the steps, you can peel off the "red" protective backing strip of the new adhesive and firmly attach it to any device as you please.
After completing the steps, you can peel off the "red" protective backing strip of the new adhesive and firmly attach it to any device as you please.
crwdns2915084:0crwdne2915084:0
York University, Team 1-10, Woodhouse Winter 2025 crwdns2935289:0York University, Team 1-10, Woodhouse Winter 2025crwdne2935289:0
YORK-WOODHOUSE-W25S1G10
crwdns2931471:02crwdne2931471:0
crwdns2935303:01crwdne2935303:0
