crwdns2915892:0crwdne2915892:0
Over time debris can build up on the print head nozzle causing irregular flow resulting in poor print quality.
-
-
The printer needs to be on in order to change the ink cartridges.
-
-
-
To locate the ink cartridges the paper output tray must be in the lowered position.
-
Next lift the scanning unit until the scanning support is vertical.
-
Lower the scanning unit until the scanning unit support seats in the scanning unit support slot.
-
-
-
-
Allow the printer to position the ink cartridge carrier into the ink cartridge removal location.
-
Before replacing the ink cartridge ensure the correct ink cartridge is installed.
-
Push down on the front edge of the ink cartridge.
-
Observe the angle at which the ink cartridge is removed.
-
Grasp ink cartridge and pull up and out to remove.
-
-
-
Hold the ink cartridge with the ink nozzle facing up. Using a paper towel firmly wipe the entire ink nozzle.
-
Repeat until the nozzle appears free of any ink and debris.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2947410:01crwdne2947410:0
is ther an easy way to gain access to the roller at the rear of the machine to clean it