crwdns2915892:0crwdne2915892:0
This guide shows how to change the engine oil for the Honda EU2200IT generator. This procedure is a prerequisite for many other repairs.
Oil specifications:
SAE 10W-30
0.46 US quarts (0.44 L)
crwdns2942213:0crwdne2942213:0
-
-
Lift and remove the spark plug cover.
-
-
-
Grab the plastic housing at the end of the spark plug wire.
-
Pull firmly to disconnect the wire from the spark plug.
-
-
-
-
Use a Phillips #2 screwdriver to loosen the screw holding the maintenance cover in place.
-
-
-
Swing the top of the maintenance cover out.
-
Remove the maintenance cover.
-
-
-
Unscrew and remove the oil filler cap.
-
-
-
Place an oil pan below the fill port to catch the engine oil.
-
Carefully tilt the generator towards the oil pan to drain the oil.
-
-
-
Add oil until the dipstick is almost completely submerged.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2947412:02crwdne2947412:0
No prende mi generarador honda eu2200
Ayuda no prende mi generador eu2200