crwdns2915892:0crwdne2915892:0
This guide will show you how to replace your old indoor doorknob and assemble a new doorknob. You will need a Phillips head screwdriver as well as a new indoor doorknob set. Both can be bought from any hardware store.
crwdns2942213:0crwdne2942213:0
-
-
Parts: (in order from left to right)
-
Short Screws
-
Latch mechanism with latch face
-
Long screws
-
Door knob with peg and screw holes (inside of the room)
-
Door knob with screw holes (outside of the room)
-
-
-
Face the inside of the knob, you should see two Phillips head screws on either side of the central knob.
-
-
-
Remove the door knob on both sides of the door.
-
-
-
You will see the latch face plate (the rectangular piece of metal) where the latch of the door knob is located.
-
-
-
-
Unscrew the two short screws on the latch face plate.
-
-
-
Remove the latch face plate and latch mechanism.
-
-
-
Push the new latch mechanism with latch face plate into the door.
-
-
-
Screw in both short screws of the latch face plate.
-
-
-
Insert the door knob that goes on the inside of the room, aligning the peg and screw holes with the threaded cylinders of the latch mechanism.
-
-
-
Align the door knob that goes on the outside of the room, aligning the peg and screw holes with the threaded cylinders of the latch mechanism.
-
-
-
Screw in both long screws on both sides of the door knob.
-
-
-
Turn the door knob to test your work.
-
To put the old door knob back on or to change to a different door knob repeat steps from the beginning.
To put the old door knob back on or to change to a different door knob repeat steps from the beginning.
crwdns2935221:0crwdne2935221:0
crwdns2935229:07crwdne2935229:0