crwdns2915892:0crwdne2915892:0
This guide will show you how to replace your old indoor doorknob and assemble a new doorknob. You will need a Phillips head screwdriver as well as a new indoor doorknob set. Both can be bought from any hardware store.
crwdns2942213:0crwdne2942213:0
- 
   
   - 
                     
            Parts: (in order from left to right) 
- 
                     
            Short Screws 
- 
                     
            Latch mechanism with latch face 
- 
                     
            Long screws 
- 
                     
            Door knob with peg and screw holes (inside of the room) 
- 
                     
            Door knob with screw holes (outside of the room) 
 
- 
                     
            
- 
   
   - 
                     
            Face the inside of the knob, you should see two Phillips head screws on either side of the central knob. 
 
- 
                     
            
- 
   
   - 
                     
            Remove the door knob on both sides of the door. 
 
- 
                     
            
- 
   
   - 
                     
            You will see the latch face plate (the rectangular piece of metal) where the latch of the door knob is located. 
 
- 
                     
            
- 
                     
                                                
- 
   
   - 
                     
            Unscrew the two short screws on the latch face plate. 
 
- 
                     
            
- 
   
   - 
                     
            Remove the latch face plate and latch mechanism. 
 
- 
                     
            
- 
   
   - 
                     
            Push the new latch mechanism with latch face plate into the door. 
 
- 
                     
            
- 
   
   - 
                     
            Screw in both short screws of the latch face plate. 
 
- 
                     
            
- 
   
   - 
                     
            Insert the door knob that goes on the inside of the room, aligning the peg and screw holes with the threaded cylinders of the latch mechanism. 
 
- 
                     
            
- 
   
   - 
                     
            Align the door knob that goes on the outside of the room, aligning the peg and screw holes with the threaded cylinders of the latch mechanism. 
 
- 
                     
            
- 
   
   - 
                     
            Screw in both long screws on both sides of the door knob. 
 
- 
                     
            
- 
   
   - 
                     
            Turn the door knob to test your work. 
 
- 
                     
            
To put the old door knob back on or to change to a different door knob repeat steps from the beginning.
To put the old door knob back on or to change to a different door knob repeat steps from the beginning.
crwdns2935221:0crwdne2935221:0
crwdns2935229:07crwdne2935229:0
