crwdns2915892:0crwdne2915892:0
After removing the outer casing, replacing the fan blades is quick and easy! You would want to use this guide to replace the broken part or clean dirty blades.
crwdns2942213:0crwdne2942213:0
-
-
Remove the four 14 mm screws from the back of the device using the Phillips #0 Screwdriver.
-
-
-
Pull the front and back parts of the case away from each other until the back is free from the front. This may require a large amount of force.
-
-
-
-
Remove the hex nut from the fan motor with a 10mm hexagonal ratcheting socket wrench.
-
-
-
Grasp the fan blade firmly and pull upward to remove it from the center column of the fan.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.