crwdns2915892:0crwdne2915892:0
This guide shows how to remove and replace the V-Belt on a Honda FRC800K1A Rear Tine Tiller.
crwdns2942213:0crwdne2942213:0
-
-
Firmly grip the base of the connector and pull it away from the spark plug to disconnect it.
-
-
-
Flip the fuel valve switch to the off position.
-
-
-
-
Use a 14 mm socket to remove the bolt securing the outer belt cover.
-
-
-
Tilt the outer belt cover down and pull it off of the lip on the inner belt cover to remove it.
-
-
-
Push the V-belt towards the transmission pulley to release tension.
-
Slip the V-belt off of the groove in the pulley.
-
-
-
Pull the V-belt down and out of the way of the two-prong belt guide.
-
Push the V-belt around and off of the motor pulley to remove.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
