crwdns2915892:0crwdne2915892:0
This guide shows how to remove and replace the muffler on the Honda EU2200IT generator.
Note: There may be some visual differences between the photos and the device you’re working on. The differences are superficial and do not affect the repair procedure.
crwdns2942213:0crwdne2942213:0
-
-
Lift and remove the spark plug cover.
-
-
-
Grab the plastic housing at the end of the spark plug wire.
-
Pull firmly to disconnect the wire from the spark plug.
-
-
-
-
Remove the four Phillips screws securing the back cover.
-
-
-
Use a 10 mm socket to remove the three bolts securing the muffler:
-
Two 50 mm-long bolts
-
One 75 mm-long bolt
-
-
-
Use a wire brush to clean any deposits off the spark arrester.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.