crwdns2915892:0crwdne2915892:0
This guide will help you to replace the power port of Harman Kardon Invoke. You may replace the power port if you faced a weak port that will affect the efficiency of the Invoke or a broken/old port that prevents the invoke from connecting to power. By replacing the power port, the Invoke should be connecting to the power perfectly.
crwdns2942213:0crwdne2942213:0
-
-
Use a metal spudger to remove the rubber base.
-
-
-
Use a T10 Torx screwdriver to remove the four 14 mm screws.
-
-
-
-
Grip the bottom firmly and wiggle upwards to remove it.
-
-
-
Use a T10 Torx screwdriver to remove two 10 mm screws from the board that is attached to the ports.
-
Pull the board up lightly.
-
-
-
Pull the cable to disconnect the board from the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2947410:01crwdne2947410:0
can I buy that power port circuit board from HK direct?