crwdns2915892:0crwdne2915892:0
The drive shaft is essential and may possibly have a stripped gear, causing the blade not to turn. There are several steps in order to take this out and replace it. Beware of lubricant along the bottom of it.
crwdns2942213:0crwdne2942213:0
- 
   
   
- 
                     
            
Unscrew the cover by turning it counterclockwise.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Grab the scraper by the midsection to remove.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Carefully remove the blades by lifting them off of the blade shaft.
 
 - 
                     
            
 - 
                     
                                                
 - 
   
   
- 
                     
            
Rotate the bowl counterclockwise to release it from the base.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Using the metal spudger, remove the four adhesive plastic covers that hide the screws.
 
 - 
                     
            
 - 
   
   crwdns2935267:0crwdne2935267:0Tweezers$4.99
- 
                     
            
Remove any excess glue that is adhered to the screws with the precision tweezers.
 
 - 
                     
            
 - 
   
   
- 
                     
            
Using a JIS #1 driver, remove the four 10 mm screws.
 
 - 
                     
            
 
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.