crwdns2915892:0crwdne2915892:0
The screen is a component of the device that is very likely to break from normal use. If your screen is cracked or if you see any dead pixels in your screen, you may need to replace your screen. This guide will show you how to replace the screen.
crwdns2942213:0crwdne2942213:0
-
-
Turn off your cell phone before disassembling.
-
-
-
Remove the two 1.17mm Torx T3 screws from the bottom of the phone.
-
-
-
Use the Sim card ejection tool to remove both the sim card trays.
-
-
-
To prepare the iOpener insert it in the microwave for 30 seconds and apply it on the side edges of the phone so that the glue underneath will soften.
-
-
-
Pry off the back with a plastic opening tool.
-
-
-
-
Remove the three 1.5mm Phillips #000 screws.
-
-
-
Use a plastic opening tool to disconnect the orange and black battery cables from the motherboard.
-
-
-
Place your Huawei Honor 5X in work space with the screen facing up.
-
-
-
Use the TE-03 opening tool to slightly pry and separate the screen from the phone at one of the corners.
-
-
-
Move the TE-03 opening tool around the perimeter of the screen, separating the screen from the phone.
-
-
-
Disconnect the ribbon cable connecting the screen to the phone. (provide location of ribbon cable).
-
-
-
Connect the ribbon cable of the new screen to the phone.
-
-
-
Place the new screen into place so that it is perfectly centered.
-
-
-
Apply pressure to the perimeter of the screen for 30 seconds to ensure the display is seated and adhered to the frame.
-
crwdns2915084:0crwdne2915084:0
The Citadel Military College of South Carolina, Team S2-G11, Eggleston Spring 2020 crwdns2935289:0The Citadel Military College of South Carolina, Team S2-G11, Eggleston Spring 2020crwdne2935289:0
CMCSC-EGGLESTON-S20S2G11
crwdns2931471:03crwdne2931471:0
crwdns2935297:05crwdne2935297:0
