crwdns2915892:0crwdne2915892:0
The vibrator is easy to find and remove after the housing has been taken off.
crwdns2942213:0crwdne2942213:0
-
-
Carefully pull the rear cover from the back of the phone.
-
Place a finger beneath the small lip on the left side of the battery.
-
-
-
Lay the phone down on it's screen.
-
Lift up on the lip and pull the battery from the phone.
-
-
-
-
Remove the four black 3.5mm T5 screws from the back of the phone.
-
-
-
Insert the flat end of a spudger between the midframe and the display.
-
Slide the spudger along the seam between the frame and the display.
-
Using the spudger for leverage, carefully pry the midframe away from the display assembly.
-
As it releases, pull the midframe away from the phone.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Set the phone down on its screen.
-
Using tweezers, unplug the small vibrator connector from its socket on the motherboard.
-
-
-
Pull the vibrator motor from the phone.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0