crwdns2915892:0crwdne2915892:0
Do you need to access the inner components of your device? Consider using this guide to remove the back cover of your device.
crwdns2942213:0crwdne2942213:0
-
-
Apply pressure along the bottom of the white panel containing the camera and push upwards.
-
-
-
Unscrew the four of 3.5mm Torx T5 screws that run along the sides of the exposed innards.
-
-
-
-
Remove the black protective piece of plastic by sliding it upwards.
-
Remove the two 3.5mm Torx #5 screws holding the protective plastic down on along the sides.
-
Either remove the sticker or jam the screwdriver into the screw, and remove the screw.
-
Remove the protective panel by sliding it upwards.
-
-
-
Before removing the back cover, apply some scotch tape to the volume buttons to prevent them from falling out of the back panel.
-
Use a plastic opening tool to lever up the top half of the cover.
-
Lift the back panel up and remove it from the device.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:02crwdne2935229:0
crwdns2915084:0crwdne2915084:0
USF Tampa, Team 8-5, Leahy Fall 2014 crwdns2935289:0USF Tampa, Team 8-5, Leahy Fall 2014crwdne2935289:0
USFT-LEAHY-F14S8G5
crwdns2931471:03crwdne2931471:0
crwdns2935297:012crwdne2935297:0
