crwdns2915892:0crwdne2915892:0
In this guide, we will show the steps necessary to replace the speaker in the HTC Evo 3D. This guide will help to restore audio from the rear speaker.
crwdns2942213:0crwdne2942213:0
-
-
Remove the outer casing of the phone with your hands by prying and lifting at the latch.
-
-
-
Remove the battery with your hands, lifting at the marked area.
-
Remove the SD card by pulling down on the bottom of the card.
-
-
-
-
Remove the four T5 screws using the cooresponding screwdriver.
-
Remove the two J000 screws using the cooresponding screwdriver.
-
-
-
With the battery removed, the inner case of the phone can now be removed.
-
Using the plastic opening tool, pry the inner case off at the marked area. Continue prying around the entire perimeter of the phone.
-
This will remove the inner case, and allow access into the inner portion of the phone.
-
The marked part in the second photo is the speaker.
-
-
-
The speaker can be loosened from its glue with the spudger.
-
Pry from the bottom with constant pressure to loosen one end of the speaker.
-
When the speaker is sufficiently loosened, completely remove it by grabbing it with the precision tweezers.
-
-
-
With the old speaker removed, insert the new speaker in the same place.
-
To reassemble your device, follow these instructions in reverse order but with a new speaker.
To reassemble your device, follow these instructions in reverse order but with a new speaker.
crwdns2935221:0crwdne2935221:0
crwdns2935227:0crwdne2935227:0
crwdns2915084:0crwdne2915084:0
USF Tampa, Team 14-20, Meier Fall 2015 crwdns2935289:0USF Tampa, Team 14-20, Meier Fall 2015crwdne2935289:0
USFT-MEIER-F15S14G20
crwdns2931471:05crwdne2931471:0
crwdns2935297:010crwdne2935297:0
