crwdns2915892:0crwdne2915892:0
With this phone, the LCD and digitizer are removed together. These can then be separated by heating. If there is a discrepancy with the way images appear on your screen you may have a broken LCD. However, if you are unable to utilize the touchscreen interface then you may have a broken digitizer.
crwdns2942213:0crwdne2942213:0
-
-
Use the plastic opening tool to pry off back cover by inserting opening tool in the space indicated and pushing down on the handle of the tool.
-
-
-
Remove the battery after taking off the cover.
-
-
-
Remove eight 4mm and one 5mm Torx screws.
-
-
-
Use a prying tool to pry off the midframe.
-
-
-
-
Remove the 4mm Torx screw holding the charging port to the phone.
-
-
-
Remove the silver bracket holding the charging port in place.
-
-
-
Use a prying tool to remove the charging port as shown.
-
-
-
Pry off and remove the back cover
-
-
-
Remove tabs holding the motherboard to the phone.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:05crwdne2935229:0