crwdns2915892:0crwdne2915892:0
This will show reader how to dissemble the inside of a HTC Desire. It will teach readers how to replace the internal speaker of the phone.
crwdns2942213:0crwdne2942213:0
-
-
Insert flat end of spudger into slot on the top of phone to pry off the back plate.
-
-
-
Use flat edge of spudger to lift the bottom right corner of the battery.
-
Lift the battery out of the phone.
-
-
-
Remove the lower, two 0.5 mm screws using Torx T5 screwdriver.
-
-
-
Use spudger to pry vibrator panel off.
-
-
-
-
Take out the upper, two 0.5 mm Torx screws with a Torx T5 bit.
-
-
-
Take the middle 0.3 mm phillips screw out with the phillips J000 tip.
-
-
-
Using the spudger, pry up to remove the battery holder.
-
-
-
Using the spudger, pry the speaker out of its place.
-
-
-
With the springs up, place the new speaker into position.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:04crwdne2935229:0