crwdns2915892:0crwdne2915892:0
Capturing images is how people retain visible proof of memories being created. This guides purpose is to help the user replace a major key component in a cellular device.
crwdns2942213:0crwdne2942213:0
-
-
Pry open the back panel by inserting the plastic opening tool on the left of the camera. We find this spot the easiest to get the tool under the panel.
-
-
-
Once you get an open spot, with a second plastic opening tool, slide down to the bottom of the phone to free the rest of side.
-
-
-
There is adhesive between the battery and the back panel. Take a nylon spudger to cut through the adhesive.
-
-
-
Once all way around the bottom, the panel should be broken free of the adhesive, and the rest of the panel should pop right off.
-
-
-
Insert a nylon spudger at the bottom of the battery and lift up to remove the battery.
-
-
-
-
There is adhesive on the other side of the battery as well, take the nylon spudger used to get off the panel and cut through.
-
-
-
Carefully lift battery backside first to disconnect the white connector.
-
-
-
Take the T5 screwdriver head to take out these 4 screws
-
-
-
Remove the black plastic casing with a plastic opening tool.
-
-
-
Take the PH000 screwdriver head to take out the one screw that's holding down the green panel. (The screw is located on the left side of the panel)
-
-
-
With your pair of tweezers carefully unplug the black and red wire in order to remove the motherboard
-
-
-
Once you have removed the wire, you can carefully lift up the motherboard
-
-
-
Peel off the yellow film that’s attaching the camera to the motherboard
-
-
-
Slowly lift up the white connector so that the camera’s cable may properly be detached.
-
-
-
Carefully peel off the adhesive so that the camera can be disconnected from the mother board
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:04crwdne2935229:0