crwdns2915892:0crwdne2915892:0
This is a device removal guide for your HTC Desire 626s battery for replacement or hard reset.
crwdns2942213:0crwdne2942213:0
-
-
Insert plastic opening tool in between the back cover and grey plastic.
-
Gently work your way around the phone while sliding the tool.
-
Gently pry on plastic cover as needed to release fasteners.
-
-
-
There are 7 screws you need to remove before prying the secondary cover off. You will need to use the JIS #000 screwdriver and the T5 Torx screwdriver to remove these screws.
-
There is a screw under the "void" sticker.
-
-
-
-
Once the screws are removed, use the plastic opening tool to remove the remaining plastic cover.
-
Start from the corners of the phone, and insert the plastic opening tool between the outer colored rim and the screen.
-
This portion of the cover will be more difficult to remove than the initial back cover. Be patient and gentle around the button holes.
-
-
-
By using the angled tweezers, you have to be careful when you try to remove the battery connection by start pulling the wires.
-
-
-
Using the plastic opening tool to separate the battery and remove it.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:04crwdne2935229:0
crwdns2915084:0crwdne2915084:0
Oregon Institute of Technology, Team S2-G7, Lancaster Spring 2019 crwdns2935289:0Oregon Institute of Technology, Team S2-G7, Lancaster Spring 2019crwdne2935289:0
OIT-LANCASTER-S19S2G7
crwdns2931471:03crwdne2931471:0
crwdns2935297:012crwdne2935297:0
