crwdns2915892:0crwdne2915892:0
This guide is used when the speakers are damaged or do not produce sound. You will need to use a little bit of force to remove the speakers from the tablet.
crwdns2942213:0crwdne2942213:0
-
-
Using a Torx T4 screwdriver, remove the four 5 mm screws on the back panel.
-
-
-
Insert the tip of a plastic opening tool in the seam between the front and back panels.
-
-
-
-
Slide the plastic opening tool around all edges of the device until the back panel detaches.
-
Lift off the back panel.
-
-
crwdns2935267:0crwdne2935267:0Tweezers$4.99
-
Using tweezers or your fingers, disconnect the two speaker cables by pulling them free of the socket connectors.
-
-
-
Use a spudger to pry the speakers up and out of the case.
-
-
-
After removing the speakers they should look like this.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.