crwdns2915892:0crwdne2915892:0
This guide will walk you through the steps of replacing the motherboard in an HP Stream x360 11-p015wm. The motherboard is an important part of the computer hardware and contains multiple main components. Follow along, step-by-step to safely remove your motherboard and then follow the instruction in reverse to reassemble your laptop! Be sure to back-up your files before undergoing this repair.
crwdns2942213:0crwdne2942213:0
-
-
Orient the laptop to have the back cover facing upwards.
-
Remove the four rubber pads located in each corner.
-
-
-
Using the screwdriver, remove all of the exposed screws.
-
-
-
Open the laptop and orient the keyboard facing upward.
-
Slowly wedge the opening tool into the gap between the keyboard and the back cover.
-
After loosening the back cover, close the laptop and orient the back cover facing upward. Open the cover.
-
-
-
Carefully use tweezers to remove the audio jack connector from the motherboard.
-
-
-
-
Remove the six 6.5 mm Phillips head screws from the battery using the JIS #00 screwdriver.
-
-
-
Unplug the wire attaching to the battery to the motherboard using the tweezers.
-
Remove the battery.
-
-
-
Remove the six 3.5 mm screws from the silver plate cover with screwdriver JIS #00.
-
Remove the silver plate cover.
-
-
-
Remove the four 3.5 mm screws from the metal arm using the JIS #00 screwdriver.
-
-
-
Detach all remaining wires from the motherboard using the tweezers.
-
-
-
Detach all remaining wires from the motherboard using the tweezers.
-
-
-
Remove the six 3.5 mm screws from the motherboard using the JIS #00 screwdriver.
-
Remove the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2915084:0crwdne2915084:0
IUPUI, Team S2-G3, Stella Fall 2019 crwdns2935289:0IUPUI, Team S2-G3, Stella Fall 2019crwdne2935289:0
IUPUI-STELLA-F19S2G3
crwdns2931471:03crwdne2931471:0
crwdns2935297:02crwdne2935297:0
