crwdns2915892:0crwdne2915892:0
If the speakers on your HP Specter laptop are not working use this step by step guide to show you how to remove and replace them.
crwdns2942213:0crwdne2942213:0
-
-
Use two opening tools, one on either side of the battery plug, to slowly pull the plug straight out of its port.
-
-
-
Use a Phillips #00 screwdriver to remove the six 2.5 mm screws securing the battery.
-
-
-
Carefully lift the edge of the battery with an opening tool.
-
Lift the battery up and out.
-
-
-
-
Remove the 3 mm Phillips screws on the speaker(s) you wish to replace.
-
-
-
Remove the two 2 mm Phillips #00 screws located under the battery.
-
-
-
Use a small pry tool to lift up and disconnect the speaker cable from the motherboard.
-
-
-
Using the same pry tool lift up on the speaker housing and remove it.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.