crwdns2915892:0crwdne2915892:0
This guide will help you fix your faulty charge port. Make sure you are wearing the Anti-Static Wrist Strap and remove the battery before beginning this guide to avoid any damage to your computer.
crwdns2942213:0crwdne2942213:0
-
crwdns2935267:0crwdne2935267:0Anti-Static Wrist Strap$7.95
-
Put on Anti Static Wrist Strap.
-
Flip Computer Upside down.
-
Unscrew the eight 3.3mm black screws on the back casing with the T4 Torx Screwdriver.
-
-
-
Use the plastic opening tool to lift the back case off.
-
-
-
Remove the six 2.0mm silver screws and the two 3.2 mm black screws using the PH00 Phillips Screw Head.
-
-
-
-
Gently unplug from CONO851 plug, using the plastic opening tool.
-
-
-
Gently lift up the battery and remove using the plastic opening tools.
-
-
-
Remove the two 2.0 mm screws in the charge port bracket using the PH00 screw head.
-
-
-
Use the plastic opening tools to remove the bracket.
-
-
-
Lift out and disconnect the charge port.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2935221:0crwdne2935221:0
crwdns2935229:05crwdne2935229:0