crwdns2894164:0crwdne2894164:0

crwdns2890822:0crwdne2890822:0

crwdns2890844:0crwdne2890844:0

crwdns2861143:0crwdne2861143:0

crwdns2860947:0crwdne2860947:0

crwdns2890040:0crwdne2890040:0

  1. Open the printer's mouth by pulling the two mouth pieces down.
    • Open the printer's mouth by pulling the two mouth pieces down.

    • Lift the flap covering the scanner. When you are finished, the printer should appear as shown.

  2. Remove the flap for the scanner by pulling lightly on the clip that attaches it to the printer.
    • Remove the flap for the scanner by pulling lightly on the clip that attaches it to the printer.

    • The clip may be damaged by applying too much force.

  3. Remove the three screws from the top of the printer using a T9 screwdriver as shown. The screws are located in the far-left, far-right, and near-right corners of the printer, with respect to the front view. The screws are located in the far-left, far-right, and near-right corners of the printer, with respect to the front view.
    • Remove the three screws from the top of the printer using a T9 screwdriver as shown.

    • The screws are located in the far-left, far-right, and near-right corners of the printer, with respect to the front view.

  4. The Essential Toolkit

    The most helpful tools in our most compact kit.

    crwdns2857080:0crwdne2857080:0

    The Essential Toolkit

    The most helpful tools in our most compact kit.

    crwdns2857080:0crwdne2857080:0
  5. Reach into the mouth of the printer and press the clip behind the power button to release the power button face.
    • Reach into the mouth of the printer and press the clip behind the power button to release the power button face.

  6. A picture of the removed power button is provided to show the location of the clip that needs to be pressed.
    • A picture of the removed power button is provided to show the location of the clip that needs to be pressed.

    • After pressing the clip, pull out the face of the power button by sliding it from the right to the left side.

  7. The power button face has a plastic holder that attaches the power button  and the wireless button to the face plate using two slots. Loosen the plastic holder by pulling the slots on the face plate away from the plastic holder. Remove the plastic holder from the face plate after the slots are loosened.
    • The power button face has a plastic holder that attaches the power button and the wireless button to the face plate using two slots.

    • Loosen the plastic holder by pulling the slots on the face plate away from the plastic holder.

    • Remove the plastic holder from the face plate after the slots are loosened.

  8. The plastic holder secures the power button by two slots. Using a spudger, push the holders inward to detach the button from the plastic holder. Using a spudger, push the holders inward to detach the button from the plastic holder.
    • The plastic holder secures the power button by two slots.

    • Using a spudger, push the holders inward to detach the button from the plastic holder.

crwdns2892372:0crwdne2892372:0

To reassemble your device, follow these instructions in reverse order.

crwdns2878480:0crwdne2878480:0

Tim Wise

crwdns2886885:001/04/2011crwdne2886885:0

173 crwdns2894548:0crwdne2894548:0

crwdns2886889:07crwdne2886889:0

crwdns2892814:0crwdne2892814:0

Cal Poly, Team 10-38, Forte Spring 2011 crwdns2886886:0Cal Poly, Team 10-38, Forte Spring 2011crwdne2886886:0

CPSU-FORTE-S11S10G38

crwdns2858115:05crwdne2858115:0

crwdns2886889:010crwdne2886889:0

crwdns2892924:00crwdne2892924:0

crwdns2892926:0crwdne2892926:0

crwdns2894754:0crwdne2894754:0:

crwdns2894766:024crwdne2894766:0 0

crwdns2894768:07crwdne2894768:0 0

crwdns2894768:030crwdne2894768:0 3

crwdns2894770:0crwdne2894770:0 3,322