crwdns2915892:0crwdne2915892:0
If power drains quickly for your battery or your battery will not charge, you may need to replace your battery. To replace the battery, you will need to know how to use a screwdriver. Small parts (screws) may be a swallowing hazard for young children; keep all parts in a secure location.
crwdns2942213:0crwdne2942213:0
-
-
Power off your device and disconnect all external devices connected to the laptop.
-
-
-
Flip the laptop over and remove the rubber foot with a Metal Spudger.
-
-
-
Remove the screws from the bottom of the laptop with a Phillips 00 Screwdriver.
-
5 Phillips 2.4 x 5.7 mm screws
-
7 Phillips 2.0 x 5.0 mm screws
-
-
-
-
Flip the laptop back over and open it; the keyboard should be facing upwards.
-
Using the Plastic Opening Tool, separate the keyboard from the base of the laptop.
-
-
crwdns2935267:0crwdne2935267:0Heavy-Duty Spudger$4.99
-
Raising the keyboard, disconnect the first of two cable ribbons with the Heavy-Duty Spudger.
-
Gently flip up the white plastic lock connecting the ribbon cable to the motherboard.
-
Use the blue plastic tab on the ribbon cable to disconnect the ribbon cable from the lock.
-
-
-
Gently flip up the white plastic lock connecting the second ribbon cable to the motherboard with the Heavy-Duty Spudger.
-
Use the blue purple tab on the ribbon cable to disconnect the ribbon cable from the lock.
-
-
-
After the ribbon cables are disconnected, gently lift up the keyboard to disconnect it from the base of the laptop.
-
-
-
Remove the screws from the perimeter of the battery with a Phillips 00 Screwdriver.
-
3 Phillips 2.0 x 4.6 mm screws
-
-
-
Holding the lower right corner, gently lift up the battery to disconnect it from the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
crwdns2947410:01crwdne2947410:0
What is the usual expected backup time for this battery?
Thanks for the instructions.